Cleaning Roofs & Canals
One of the hiding places of the mold is in the obstructed gutters or the upper part of the roofs. Leaves and other wet debris can remain trapped and stagnant, providing a mold-like place to rot and grow.
Beware Composting Stacks
If you have a pile of compost, keep it away from the house to prevent mold spores from entering the house through the basement or walls. If you are moving the compost pile, be sure to wear a protective mask to avoid inhaling toxic molds released into the air.
Sunlight is important for reducing outdoor humidity
Houses that are heavily shaded by large or protruding trees are more likely to have damp and moldy areas. Direct sunlight in the area can reduce the chance of mold. If you have mold allergies, this step is particularly important.
Disposal of Damaged Materials
Mold-contaminated building materials and furniture should be placed in sealed waterproof bags or closed containers while in the remediation area. These materials can usually be discarded as normal construction waste. Bulky items with heavy mold growth should be covered with polyethylene sheets and sealed with adhesive tape before being removed from the remediation area.
Check the Humidity Levels
Keeping moisture levels under control is an excellent way to prevent mold from growing. Air conditioning or dehumidifiers can act as an effective control for mold growth. These appliances must be kept clean to avoid contaminating them with molds that can aggravate the problems of sensitive people. They can be cleaned by rubbing or spraying them with an aerosol solvent. The ideal humidity level in a home should be between 35 and 40 percent. Levels above 50% allow mold growth.
Eliminate Mold With Bleach *
One of the best ways to get rid of mold is to treat it as the most resistant clothing stains. In these cases, try cleaning them. The ideal solution is a cup of bleach in 10 cups of water or a cup of chlorine in a gallon of water. Rub the places inside your house where there is mold. Better places for the mold growth bases, bathroom curtains, baths, accessories, floors and walls, bathroom curtains, tiles and behind the toilet, window panels, basement walls, floors and ceilings; and areas around the laundry.
* Note: we do not recommend whitening for most mold problems. See this article on the 3 reasons why you should not use chlorine in the mold.
Clean Your Closets
Mold is often found in shoes or even in clothes. The cabinets can be a soil purifier for the growth of molds. If allergic or asthmatic reactions do not seem to be better, it may be time to replace them. If mold exposure is unavoidable during cleaning, sensitive people must wear a tight-fitting mask.
Inspect Appliances
Artifacts that have mold inside them can increase allergies to molds of the sensitized individual. Suitable for dryers and heaters. Another potential mold is raising the drip tray of the refrigerator, which can accumulate enormous amounts of moisture.
Pay Attention to Holidays
Holidays can be when mold allergies or reactions get worse. This is especially true for beach holidays, forests, or anywhere. If you visit several times a year, clean it before using it.
Water Leaks Inside the House
Replace or remove porous materials, such as tiles, rock slabs, carpets, and wood products. Drying does not remove all the dead spores on the heavily patterned carpet. 12 inches above the high tide sign. Visually inspect the wall and remove any other intrusive molds. This can be performed by an authorized contractor. Any wet or wet insulation must be replaced with dry insulation.
Suggestions for removing superficial molds
How can I remove superficial mold?
Here are some tips for removing molds on various types of surfaces:
- How to remove mold from the skin
If it is leather, it is better to use a cup of water. Remove the mold by rubbing the wet cloth and drying it in a place where the air circulates. - How to remove mold from the carpet
Shampoo with a carpet, shampoo, and shampoo.
Disinfect the carpet by applying a solution containing 1/4 teaspoon of chlorine with 1 cup of water or any sanitizing product. After shampooing and disinfecting, rinse the carpet or carpet several times and dry it quickly on the outside. - What should I do if the mold is blurred?
If you notice that the mold has a widespread appearance, the owner should aspire to it in the best possible way. If the mold is abundant, it is recommended to replace the filter after vacuuming. After vacuuming, you should brush well with a brush. The area should be clean and clean with towels and rags. - What happens if the mold grows back?
Mold will not last long if the problem has been eliminated in your home. If, after all that work, the mold returns, there is no other option.
It will also eliminate the source from which they come. But remember that if the moisture is not completely cured or removed from the house, it’s just an invitation for the mold to come back.
2 simple steps to eliminate mold
Is mold dangerous?
When we talk about molds, we usually think about the annoying growth of widespread materials in our old shoes. Not very risky for health, right? Mistaken! In recent decades, we have only begun to understand and understand the possible health risks that can occur when we inhale, ingest, or when our skin is moldy. An example of how dangerous the Stachybotrys chart arum fungus can be is more commonly known as black or toxic mold.
The black mold was first described as Stachybotrysatra by Corda in 1837 when samples were found in a wallpaper collected in a house in Prague.
This fungus is a member of the Deuteromyceti, monile order, Dematiaceous family, and is common in plant remains and soil.
Mold requires constant humidity to grow.
Stachybotrys chartarum, or black mold, is a fungus that has become a well-known manufacturer of mycotoxins that can cause mycotoxicity in animals and humans.
S. Chartarum is a greenish-black mold found in damp or flooded homes.
Dangerous mold: who is at risk?
How do you know if you’re at risk?
If you have allergies, you probably know exactly what will trigger an attack. You work very hard to avoid these allergens, mainly because you want to save the discomfort and complications associated with health. However, everyone avoids the causes of their allergy attacks, not everyone who has allergies knows their triggers. People who are not even aware of being allergic to something. It could have been a serious medical reaction to a substance.
Who is more at risk?
Some people are more at risk of developing complications when exposed to dangerous household molds. If you are in one of these groups, you should be aware of your risk:
- People with allergies:
Although this seems obvious, it is important to consider how they are exposed to mold. People with dust allergies. However, what happens if you’re not allergic to dust? The answer is surprising. Many people are allergic to molds that are ingested rather than inhaled. If they eat something that contains mold. Cause this reaction. - People with compromised immune systems:
Our immune system works to prevent diseases and allergies. If a person has undergone chemotherapy and lives with HIV or an inherited autoimmune disease, it is more likely to be exposed to mold. They can protect them, but they can develop complications quickly. - People with lung diseases:
A problem with an immune system that can be compromised: mold, when it is breathed, can lodge inside the lungs. For someone with a pulmonary condition, this can lead to a worsening of their symptoms or, in some cases, an infection.
Why is this important?
It can lead to serious problems for people at risk. Most people who do not have allergies do not consider health complications. You can enter the shower every day because you can find the mold there. Even when they visit their doctors, they have not been able to solve this problem. It is important to keep the mold under control before it causes a problem. Keeping your home free from excess moisture is a good start. Proper cleaning of any mold build-up will also keep you and your family safer and healthier.